USED IRON WORKER

MANUF. GEKA, MODEL HYDRACROP 80 SD - BUILD 2000

Capacities: Flat 450 x 15 mm / 300 x 20 mm Angle 130 x 130 x 13 mm Round 45 mm dia Square 45 x 45 mm UPN 140 / IPN 140 Notching 90 x 52 x 12 mm Punching (80 ton) 40 mm dia x 14 mm / 24 mm dia x 24 mm Gap in frame 500 mm No of strokes 40 pr/min Motor power 9 Kw   Hydraulic   Equipped with: Controlled length stop Large selection of various toolings (see photos)

USED CNC LATHE

MANUF. TAKISAWA, MODEL TS 25-B. SERIAL NO. TKMS 1166 - BUILD 1991

Turning length 560 mm Max. swing over bedways 520 mm Max. turning diameter 280 mm Spindle bore 75 mm Spindle speeds 35-3500 rpm Spindle speeds on live toolings 2000 rpm No. of stations in turret 10 No. of stations in turret for live toolings 5   Control: Fanuc 0-T   Equipped with: Hydraulic 3-jaw chuck 6 pcs. live toolings Various holders Hydraulic tail stock   Against surcharge of Euro. 6.000, the machine can be delivered with: LNS magasine bar feeder, model QL Servo 80-S2 - build 2011.

NEW HYDRAULIC WORKSHOP PRESS

MANUF. PROFI PRESS, MODEL 300 TON M/H-M/C-2 D=1750

Max. pressure 300 ton Stroke 480 mm Distance between frames 1750 mm Working speed 1,80 mm/sec. Rapid speed 4,90 mm/sec. Return speed 6,20 mm/sec. Motor power 5,5 Kw   Motorized   Equipped with: Hydraulic unit w/2 speeds  Adjustable work table Movable cylinder (left/right) Foot pedal or hand remote for control of piston   Optional Accessories: V-Block set for extra support

USED CNC-LATHE

MANUF. MORI SEIKI, MODEL SL 25M - BUILT 1987

Turning length 500 mm Max. turning dia. 350 mm Spindle bore 68 mm Spindle speeds 2500 rpm Spindle speeds on live toolings 2000 rpm Turret with 10 stations Hydraulic tail stock   Control: Fanuc 10 TF   Equipped with: Various tooling 2 pcs. live tool holders 250 mm hydraulic 3-jaw chuck Various jaws

USED LATHE

MANUF. STANKO, MODEL 1A64-165

Distance between centers 5000 mm Center height 440 mm Swing over bedways 880 mm Spindle bore 85 mm Spindle speeds 7,1-750 rpm   Equipped with: 3-jaw chuck Various drill bars Coolant Rapid feeding 2 pcs steady rests

USED CNC-BEDMILL

MANUF. SORALUCE, MODEL TL 25 - BUILT 1998

Table size 2900 x 1000 mm X (length) / Y (vertical) / Z (cross) - 2500/1600/1000 mm Spindle taper ISO 50 Spindle speeds 2000 rpm Toolchanger w/30 stations Indexing vertical head 2,5 deg. Motor power - spindle 22 Kw   Internal coolant through spindle   Control: Heidenhain TNC 426   Total "power on" hours 40.700   Equipped with: 40 toolholders (approx) Controlled rotary table 1000 x 1000 mm

USED CNC-LATHE

MANUF. DAINICHI, MODEL BM 105 - BUILT 1988

Turning length 4000 mm Max. turning dia. 900 mm Max. swing 1050 mm Spindle bore 90 mm Turret w/12 stations (6 rotating) C-axis   Internal coolant   Control: Fanuc 10 TF   Equipped with: 40 tools (RBS 65) 2 Steady rests

USED CNC-VERTICAL LATHE

MANUF. SEDIN/SCHIESS, MODEL 1A525M - BUILT 1981 (REBUILD 1999)

Table size 2240 mm Max. swing 2500 mm Max. material height 1600 mm Table load 25 ton Table speeds 0,27-138 rpm Movement of vertical supports 1200 mm No of vertical supports 2 pcs Tool changer on vertical suppports w/10 stations Weight of machine 47 ton   Control: Siemens Sinumerik 810   Equipped with: Various jaws for clamping

USED CNC LATHE

MANUF. MAZAK, MODEL QT 20 - BUILT 1985

Turning length 1000 mm Max. swing 508 mm Max. turning dia 300 mm Spindle speeds 3000 rpm Spindle bore 65 mm Turret w/8 stations Motorpower 18 Kw   Control: Mazatrol T2   Equipped with: 6 tool holders

USED TURNING AND MILLING CENTER

MANUF. MAZAK, MODEL INTEGREX 200-III ST - BUILT 2003

Turning/milling length 1045 mm Max. diameter 660 mm Spindle bore (main/sub) 65/50 mm Spindle speeds (main/sub) 4000/5000 rpm Spindle speeds on milling spindle 15000 rpm No of stations in tool changer 40 Full C-axis (both spindles) Y-axis Lower turret w/9 stations   Control: Mazatrol PC Fusion-CNC 640 MT Pro   Equipped with: 5 tool holders Chip conveyor Parts catcher

USED FACING LATHE

MANUF. WMW, MODEL DP2/S2 - SERIAL NO. 33-1036

Faceplate dia 1250 mm Max swing 2000 mm Spindle speeds 9-450 rpm Weight 19 ton   Automatic feeding on slides   Equipped with: Pendant control 1 - axis dro Floor plates 2600 x 2000 mm

USED PRESS BRAKE

MANUF. DONEWELL, MODEL 35-2000, SERIAL NO. 184041853 - BUILT 1984

Bending length 2000 mm Max. pressure 35 ton Gap in frame 200 mm Distance between uprights 1550 mm   Equipped with: Front operated back gauge Various toolings Foot pedal

USED FRICTION WHEEL PRESS

MANUF. SIMMERING-GRAZ-PAUKER, MODEL FS 23/90 - MASKIN NR. 4785

Max. pressure 400 ton Table size 900 x 900 mm Press ram size 900 x 800 mm Distance between uprights 970 mm Daylight 710 mm Max. length of stroke 500 mm Motor power 30 Hp   Length/width/height - 2900/2500/6500 mm - Weight 18 ton

USED CNC LASER CUTTING MACHINE

MANUF. BYSTRONIC, MODEL BYSTAR 3015 - BUILT 2010

Working area 3000 x 1500 mm Max. thickness 20/25 mm (Stainless/Black steel) Max. capacity 4400 Watt

USED CNC PLASMA CUTTER

MANUF. MICROSTEP, MODEL HS.6001.30 PP - BUILT 2010

Working area 6000 x 3000 mm Max. plate thickness 50/60 mm (Stainless/Black steel)   No of burners 2   Equipped with: 2 pcs. Hypertherm HPR 260 XD power sources

USED VERTICAL MACHINING CENTER

MANUF. MAZAK, MODEL VTC 300C - BUILT 2013

Table size 2000 x 760 mm X/Y/Z - 1740/760/660 mm Spindle speeds 12000rpm No. of stations in tool changer 48 pcs Coolant through spindle   Working hours 12500   Control: Mazatrol 640 M - PC Fusion-CNC   Equipped with: Prepared for 4th axis Renishaw OMP 60   Spindle has just been reconditioned

USED CNC MILLING MACHINE

MANUF. PEDERSEN, MODEL VP 3000 - BUILT 2006

Table size 1200 x 450 mm X/Y/Z - 650/480/475 mm Max. table load 400 kg Spindle taper ISO 40 Spindle speeds 65-4000 rpm (stepless)   Hydraulic tool clamping   Control: Heidenhain TNC 310/410   Equipped with: 8 pcs. tool holders Vice

USED VERTICAL MACHINING CENTER

MANUF. MAZAK, MODEL NEXUS 510C - BUILT 2003

Table size 1300 x 550 mm X/Y/Z 1050/510/510 mm Toolchanger w/30 pockets Spindle taper BT 40 Spindle speeds 12000 rpm   Control: Mazatrol PC-Fusion-CNC 640 M Nexus   Equipped with: Coolant through spindle Chip conveyor

USED PLATE BENDING ROLL

MANUF. ROUNDO, MODEL PS 390 - BUILT 1979

Bending length 2000 mm Max. prebending 28 mm Max. rolling capacity 37 mm (1950 mm dia) Top roll dia. 390 mm Motor power 30 Kw Hydraulic Hydraulic drop end   Equipped with: Cone bending attachment

Latest news